DIY arcade joystick handle set kits 5 pin 24mm / 30mm push buttons spare parts USB cable to PC joys
[32770679289] （Standard Version: PC single chip） 1. Overview: This single chip is a multi-functional USB rocker control chip (4-axis 12-button 1 POV) controller. The circuit is compatible with USB 1.0/USB 2.0 and supports Win98/Win Me/Win 2000/Win XP. It has passed the USB Check and Hid View Tests. The default interface form of the 4 axis 12KEY 1POV under the Windows system: 2, characteristics High performance COMS technology. The rocker IC supports a variety of game device forms, and can be converted arbitrarily in both digital and Analog modes. Support function keys TURBO and AUTO mode, accompanied by LED flicker. USB connects normal instructions (Good Connect). Support 8 bit ADC for 3D rocker and 7 bit PWM for ANALOG. It supports the center location and center dead zone function. Supports the above version, supports all force feedback games supporting DirectX Output in Win2003 and the following operating systems. 3, function description AUTO-FIRE mode: When the function key and the AUTO key are pressed at the same time, the function key enters the AUTO-FIRE mode, and the corresponding DLED or ALED flickers at 12 Hz frequency. When the key is pressed at the same time as the CLR key, it exits the AUTO-FIRE mode, and then the DLED or ALED returns to the normal bright state. TURBO mode: if the function key and the TURBO key are pressed at the same time, the function key goes into the TURBO mode. In this mode, the corresponding DLED or ALED flickers at 12 Hz if the function key is pressed. If the function key is not pressed, the DLED or ALED will remain bright. When the function key and the CLR key are both on time, the TURBO function is cleared. At the beginning of today, there will be an extra discount for 2 sets of purchases. Descriptions: Color: Pink / red / Black / white Voltage: 5V Joystick size: approx. 95x60x100mm The encoder plate size: approx. 85x35mm The length of the USB cable: approx. 1.8 M. The model compatible: MAME & fight of the rod etc. Note: please leave a message, what color you need, or we send it to you. Thank you for your understanding! !! Characteristics: Brand new and high quality. Available in four color options. Each encoder can only support a joystick. You can use them to DIY your own machine game arcade. Package includes: 1X encoder plate 1X USB cable 1X 5 pin joystick 8x30mm pushbuttons 2x24mm pushbuttons 13X cables to wire for buttons. Red is available, please leave a note
No comments:
Post a Comment